DROP DESIGN FIRE BIOETHANOL

The bioethanol burner is the ideal accessory for DROP DESIGN FIRE. The bioethanol droplet acts as a separate bulb, which means you can still use your Drop open fire normally with wood or charcoal. If you need a quieter atmosphere, you can use the bioethanol lid. It is also possible to use the ethanol burner in enclosed spaces, provided there is adequate ventilation in the space.

The Drop Design Fire bioethanol burner is presented as a droplet with an integrated bioethanol tank. It is possible to fill the tank with a maximum of 1.5 liters of bioethanol. Refueling is done either from the edges of the drop, or by lifting the drop from the lid and pouring the bioethanol into the tank. The design fire burns for about 1.5 hours with 1.5 liters of bioethanol.

INSTRUCTIONS

• When filling the burner with bioethanol, the liquid level should not be higher than the height of the plate (approximately 1.5 liters).
• Bioethanol should not be added to a burning or hot burner.
• The burner must have cooled to the touch before refueling.
  Bioethanol must not be poured into the fireplace or on surfaces of the fireplace other than inside the burner.
• Bioethanol consumes a lot of oxygen during combustion, therefore adequate ventilation must be ensured in confined spaces.
• The fire is extinguished by putting the lid on.